Self-Cleaning (Spray Wand And Nozzle); Holiday Mode; Descaling - DURAVIT SensoWash Starck f Lite Manual De Instrucciones

Self-cleaning (spray wand and nozzle)
SensoWash automatically cleans the retracted spray wand when the seat sensor is
®
activated and also before and after washing functions are used.
> Activate additional self-cleaning via app.
Self-cleaning (

Holiday mode

If you do not use SensoWash
> Disconnect water supply.
> Activate holiday mode via app (
> Switch off the power supply.
> Remove the batteries from the remote control (
Holiday mode

Descaling

NOTICE
In regions with hard water, limescale build-up can impair the performance of the
product.
> Check the water quality in your region. Duravit recommends the installation of a
water softener with water hardness ≥ 14 °dH (2.5 mmol/l).
> Make sure to descale the product regularly (
send an automatic reminder. Adjust the descaling settings according to the water
hardness in your region (
> Only use descaling agents provided or approved by Duravit.
Water hardness
soft <8.4 °dH (1.5 mmol/l)
moderate 8.4 – 14 °dH (1.5 – 2.5 mmol/l)
hard >14 °dH (2.5 mmol/l)
Table: Descaling cycles
s
pray wand and nozzle)
for two weeks or above, deactivate the product.
®
App: Menu - Care - Holiday mode
Product damage due to limescale build-up
App: Menu - Care - Descaling
Ch. 5: Change batteries).
Table: Descaling cycles). The app will
13 ).
Descaling cycle
every six months
every six months
quarterly
EN
).
13
23