Tabla De Contenido - Stihl FCS-KM Manual De Instrucciones

Contents
Interchangeable Attachments
Guide to Using this Manual
Safety Precautions and Working
Techniques
Using the Unit
Approved Basic Power Tools
Mounting the Attachment
Mounting the Cutting Blade
Mounting the Loop Handle
Starting / Stopping the Engine
Storing the Machine
Replacing the Depth Wheel
Replacing the Skirt
Replacing the Cutting Blade
Checking and Replacing the Wear
Guard
Maintenance and Care
Main Parts
Specifications
Maintenance and Repairs
Disposal
Trademarks
FCS
2
2
3
9
11
12
14
14
15
16
16
17
17
18
18
20
21
21
22
22
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Allow only persons who fully understand
the manuals of the basic power tool and
your edger attachment to operate this
power tool combination.
To receive maximum performance and
satisfaction from your STIHL edger
attachment, it is important that you read,
understand and follow the safety
precautions and the operating and
maintenance instructions in chapter
"Safety Precautions and Working
Techniques" before using your edger
attachment. For further information you
can go to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
WARNING
Because a power tool power head and
shaft equipped with an edger
attachment is a high-speed, fast-cutting
power tool, some special safety
precautions must be observed to reduce
the risk of personal injury. Careless or
improper use may cause serious or even
fatal injury.
English
1