MIRKA MIRO 955 Instrucciones De Manejo página 9

To replace the Hook and Loop Sponge Pad:
The sponge pad must be perfectly fl at to get good sanding results. If it is deformed or dam- fl
aged it will cause very uneven sanding. Always replace it when damaged. It is hook and loop
on both sides, so to Replace it, peel it away from the hook and loop on the Sanding Plate Base-
and, taking great care to keep it perfectly centered, affix a new one. ffi
The Brush Bristles on the edge of the Sanding Plate Cover:
The brush bristles on the edge of the Sanding Plate Cover serve two purposes, they keep the
sanding disc properly aligned with the work surface with out gouging and they also help the
effi ciency of the dust collection by the vacuum cleaner. These brush bristles will wear with ffi
continued use.
The Sanding Plate Cover should be replaced when the bristles are too worn to ensure effective ff ff
dust collection and stabilization of the sanding head.
To replace, bring the unit to an authorized service center.
NOTE: Only use sandpaper discs which fi t properly and which are designed for vacuum fi
use.
* install the vacuum cleaner hose:
1. Unplug the machine.
2. Plug the vacuum cleaner hose bayonet mount into the swivel mount in the back of the
machine. Once the tangs of the bayonet mount are fully inserted in the slots, hold the swivel
mount from turning and turn the hose bayonet mount clockwise to lock.
3. Removal is the opposite of assembly.
9