Specific Safety Rules; Functional Description - MIRKA MIRO 955 Instrucciones De Manejo

Symbols used in this manual
V. . . . . . . . . . . . . .volts
A............. .amperes
Hz............hertz
W.............watt
~............. .alternating current
/min......... revolutions or reciprocation per minute
............class II tool

SPECIFIC SAFETY RULES

1.Keep hands away from rotating sanding head area at all times!
2.Prolonged breathing of airborne dust from drywall sanding may effect respiratory ff
function:
Always use a vacuum cleaner with a bag approved for drywall dust installed.
Always wear a respirator approved for dust and mist.
3.Sanding LEAD-BASED paint is extremely toxic and should not be attempted. Only allow
professionals with special training and equipment perform this task.
4.Maintain proper footing and balance at all times. Do not overreach. Use proper scaffold- ff ff
ing
5.Always wear appropriate safety equipment when operating.
6.Important: After completing sanding, switch off the switch and wait for the coasting ff
sanding head to stop completely before putting the tool down.
7.Never operate the tool in an area with fl ammable solids, liquids, or gases. Sparks from the fl
commutator/carbon brushes could cause a fi re or explosion. fi
8.There are certain applications for which this tool was designed. The manufacturer
strongly recommends that this tool NOT be modifi ed and/or used for any application other fi
than for which it was designed. If you have any questions relative to its application DO NOT use
the tool until you have written the manufacturer and have been advised.
9.Use the machine with both hands at all times. Loss of control can cause personal injury.
10.Keep power supply cord clear from the working range of the machine. Always lead the
cable away behind you.
11.Immediately switch off the machine if unusual vibrations or if other malfunctions oc- ff
cur. Check the machine in order to find out the cause. fi
12.The dust that arises when working with this tool can be harmful to health. Use a dust
absorption system and wear a suitable dust protection mask and remove deposited dust with
a vacuum cleaner.

FUNCTIONAL DESCRIPTION

This Electric Drywall Sander is specially designed for the most effi cient sanding of drywall or ffi
plaster walls and ceilings for both new construction and renovation work. It is designed to
work in conjunction with a vacuum cleaner for minimum dust and best sanding results. The
pivoting sanding head allows excellent results with minimum time and effort. ff ff
7