Telcoma Automations T10 FM400 Instrucciones De Uso página 28

GB
MOTOR MODE
Connect the motor to terminals 3, 4 and 5 as follows:
- terminal 3 (F1): one motor phase
- terminal 4 (C): common
- terminal 5 (F2): the other motor phase
Then connect the 230 Vac power supply to terminals 1 and 2.
In case of reverse rotation of the motor, close jumper F3. The motor will
reverse the rotation movement.
LIGHT MODE
Two lights can be controlled by connecting them as follows:
- Light 1 between terminals 3 and 4
- Light 2 between terminals 4 and 5
Then connect the control unit power supply to terminals 1 and 2.
PROGRAMMING OF TRANSMITTERS in MOTOR mode
Programming button
no. of times to press
to automatically memorise the OPEN-STOP-CLOSE buttons of a 20
channel radio control or a 2/4 channel radio control (in this case
1
buttons 1 and 2 will have the OPEN and CLOSE functions while
button 3 will have the STOP function).
to memorise the step-by-step function on a single button of a radio
2
control.
not used
3
to delete a code already memorised
4
After having selected the memorise or delete function press the transmitter
button to be memorised or deleted. The flashing Led will remain fixed for
about one second to confirm the successful outcome of the operation.
To reset the entire memory, press the programming button for about 10
seconds, until the LED lights up.
28
Function
15