Festool TRC 3 Manual De Instrucciones página 9

Ocultar thumbs Ver también para TRC 3:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Contents
1
Symbols .................................. 9
2
Technical data .......................... 9
3
Intended use............................ 9
4
Safety instructions .................... 9
5
Operation ................................ 10
6
Service and maintenance ........... 10
7
Disposal .................................. 10
8
Warranty ................................. 10
9
EU Declaration of Conformity...... 11
2
Technical data
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating
Charging times forr
Permitted charging temperature range
Temperature monitoring
3
Intended use
The charger TRC 3 is designed for charging
the battery packs listed.
The charger is designed for internal use only.
WARNING
The user will be liable for damage due
to improper use.
4
Safety instructions
Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
– The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, senso-
ry or mental ability or without suffi-
cient experience and/or knowledge,
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1
LiIon 1,5 Ah/ 3.0 Ah, 80 %
LiIon 1,5 Ah/ 3.0 Ah, 100 %
NiCd 1,3 Ah/ 2,4 Ah
NiMH 2,0 Ah/ 3,0 Ah
unless they are supervised by a per-
son responsible for their safety or
have been instructed on how the
charger or power tool is to be used.
Children should always be supervised to
ensure that they do not play with the
charger or the power tools.
– Do not open the battery pack or the charg-
er. Even after disconnection from the
mains, there is still a high capacitor voltage
inside the charger.
– Make sure that metal objects (such as met-
al chips) or fluids do not collect in the bat-
tery pack retaining slots or enter the
machine through the air vent slits (danger
of short circuit).
– Do not charge battery packs from external
manufacturers. The charger is designed for
charging original battery packs only. Never
charge the battery packs in chargers from
external manufacturers. Otherwise there is
a danger of fire and explosion.
Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
approx. 25/ 55 min
approx. 35/ 70 min
approx. 25/ 50 min
approx. 50/ 70 min
TRC 3
GB
TRC 3
220 - 240 V ~
50/60 Hz
7,2 - 18 V=
max. 3 A
approx. 0,06 A
-5 °C to +45 °C
via NTC resistor
9
Tabla de contenido
loading

Tabla de contenido