Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATING AND MAINTENANCE MANUAL
THE USER SHOULD KEEP THIS DOCUMENT
1. INTRODUCTION
GB
Thank you for having chosen EBARA submersible motor-
driven pumps. Our products are attentively constructed
to guarantee fully safe use. Improper motor-driven pump
use may, however, cause accidents. Therefore you should
follow the instructions in this manual.
For best and correct motor-driven pump use, follow the
instructions in this manual. If you need further information,
get in touch with your nearest authorized dealer.
This instruction manual should be kept in an easily accessible
place to permit quick consultation.
NO PART OF THESE ILLUSTRATIONS AND/OR TEXT
MAY BE REPRODUCED FOR ANY REASON.
The following symbols have been used in the compilation
of this instruction booklet:
Risk of damaging the pump or system
WARNING!
Risk of causing injury or damaging property
Electrical hazard
2. CONTENTS
3. IDENTIFICATION DATA
3.1. MANUFACTURER
EBARA PUMPS EUROPE S.p.A.
Production headquarters:
Via Pacinotti, 32 - 36040 BRENDOLA (VI) ITALY
Telephone: +39 0444/706811 - Fax: +39 0444/405811
Registered offices:
Via Campo Sportivo, 30 - 38023 CLES (TN) ITALY
Telephone: +39 0463/660411 - Fax: +39 0463/422782
DL, DL W/C, DML, DMLV, DS, DVS pumps are produced
in the following factory:
EBARA DENSAN (KUNSHAN)
No 521. Qingyang (N.) Road, Zhoushi Town, Kunshan City,
Jiangsu Province. China.
8
4. WARRANTY AND TECHNICAL ASSISTANCE
FAILURE TO FOLLOW THE INSTRUCTIONS PROVIDED
IN THIS MANUAL AND/OR ANY WORK ON THE
MOTOR-DRIVEN PUMP NOT CONDUCTED BY
OUR SERVICE CENTRES SHALL NULL AND VOID
THE WARRANTY AND, CONSEQUENTLY, THE
MANUFACTURER CANNOT BE HELD LIABLE FOR
ANY INJURIES OR DAMAGES TO PROPERTY AND/
OR THE MOTOR-DRIVEN PUMP.
When you receive the motor-driven pump, make sure no
part of it has been broken or is badly dented. If you find
any such damages, point it out to the person making
the delivery immediately. Then, once you have removed
the motor-driven pump from its packaging, make sure
it has not been damaged during transit. If it has, advise
the dealer thereof within 8 days of delivery. Next, check
whether the specifications indicated on the motor-driven
pump nameplate are the ones you ordered.
The following parts are subject to normal wear and tear
and, as a result, are covered by a limited warranty:
-
bearings;
-
mechanical seal;
-
o-rings;
-
capacitors:
5. SAFETY WARNINGS
Before using the motor-driven pump, the user should
know how to conduct all the operations described in this
manual and apply them during motor-driven pump use
8
or maintenance.
8
5.1. PREVENTIVE MEASURES
8
TO BE TAKEN BY USER
8
8
9
The user must meet all workers safety standards
9
in effect in his country. Furthermore, motor-
driven pump specifications must be taken
10
into account (see chapter 7 "TECHNICAL
10
SPECIFICATIONS").
11
During motor-driven pump handling, maintenance
11
or repairs, disconnect the electrical supply to
12
prevent the pump from accidentally starting
13
and causing injuries and/or damages.
13
142
Any maintenance, installation or handling carried
out on the motor-driven pump with the system
power on can result in serious accidents, and
possibly even death.
Do not start the motor-driven pump in your
bare feet, or worse yet, while standing in water
or when your hands are wet.
Do not use the pump at outside the range
of the specification, such as handling liquid,
installing site, and power source.
Do not undertake any operation or work on
your own initiative unless allowed by this
manual.
Capítulos
Tabla de contenido
