Tecnotest Easylight 432 M Manual Operativo página 38

TO USE CORRECTLY ____________________________________ ELECTRONIC HEADLIGHT CENTERING DEVICE
TO USE THE HEADLIGHT CENTERING DEVICE Easylight
CORRECTLY
Follow these instructions to use your Headlight Centering Device correctly:
The instrument should be used in a place possessing the following
•
characteristics: it must not be exposed to direct sunlight; it must not be
subjected to sudden changes in the temperature or humidity values; it
must not be subject to vibrations; it must be not be splashed by water or
other liquids.
When using the Headlight Centering device, check that the surfaces on
•
which the instrument and vehicle stand are well levelled.
• The recommended dimensions of the bearing surface are as follows:
width 2.3 meters.
length 8.5 meters.
Take great care to check the longitudinal and side slope of the
bearing surface. It must not exceed 1%.
34 OPERATING INSTRUCTIONS
TO USE CORRECTLY ____________________________________ ELECTRONIC HEADLIGHT CENTERING DEVICE
TO USE THE HEADLIGHT CENTERING DEVICE Easylight
CORRECTLY
Follow these instructions to use your Headlight Centering Device correctly:
The instrument should be used in a place possessing the following
•
characteristics: it must not be exposed to direct sunlight; it must not be
subjected to sudden changes in the temperature or humidity values; it
must not be subject to vibrations; it must be not be splashed by water or
other liquids.
When using the Headlight Centering device, check that the surfaces on
•
which the instrument and vehicle stand are well levelled.
• The recommended dimensions of the bearing surface are as follows:
width 2.3 meters.
length 8.5 meters.
Take great care to check the longitudinal and side slope of the
bearing surface. It must not exceed 1%.
34 OPERATING INSTRUCTIONS