Reshipping - Glomex URANIA 2 V9331 Manual Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para URANIA 2 V9331:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

URANIA 2 V9331 - PANDORA V8001 - RHEA V8100
10. The decoder blocks
11. The equipment operates with
still boat but not with moving
boat
For further information, please address to the
GLOMEX Service Centre (see section "Technical
Support").

11. RESHIPPING

Should you need to return the antenna to
GLOMEX, place it in a box, possibly the original
one, making sure it is well packaged and that the
upper and lower side are well recognizable.
In order to prevent any damage to the antenna dur-
ing transport, it is necessary to fasten it to the lower
radome by means of four M8 nuts screwed on the 4
screws coming out of the lower radome.
Together with the antenna, please also send the
control unit, so that a verification of the whole sys-
tem is possible.
NOTE: GLOMEX will not be liable for possible
damage occurred during transport due to incorrect
packaging.
S
WARNING
Do not ship the antenna to GLOMEX for repairs
without having received a corresponding authoriza-
tion to return the material (RMA), as reported in the
general warranty/support conditions.
- alternating current fluctuations - refer to the user manual of the
- the
satellite
signal
obstructed
-
failure in the gyroscope sys-
tem
66
receiver for support
is
- move
away
from
obstacles obstructing the sat-
ellite signal
- contact the Service Centre
www.glomex.it
possible
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Pandora v8001Rhea v8100

Tabla de contenido