Technical Data Charger And Battery (C); Function Of The Unit; Overview Ro Dd60 (A); Operating Ro Dd60 (B) - Rothenberger RO DD60 Instrucciones De Uso

Vibration emission value, screwing without impact (a
The vibration level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
3 Technical Data charger and battery
Battery:
U = Voltage
C = Capacity
W = Weight
Ic = Charge current
t = Approx. charging time (90% full)
Charging voltage ............................ 20,75 V DC
Charging temperature ..................... 0° - 50° C
Max. discharging temperature. ....... 5° - 50° C
Recharge battery pack before first use!
4

Function of the Unit

4.1 Overview RO DD60
Keyless chuck
1
Sleeve (torque, drilling)
2
Switch (1st/2nd gear)
3
Rotation selector switch (rotation setting,
4
transport lock) - both sides of the machine
Bit depot
5
Symbol explanation:
Slow
Fast
First gear
Second gear
4.2 Operating RO DD60
Removing, replacing battery pack (fig. B1)
Setting direction of rotation, transporting safety device (switch-on lock.
) ... < 2,5 m/s² ¦ K
h,S
Charger:
U1 = Input voltage
f1 = Input frequency
P1 = Input power
U2 = Charging voltage
I2 = Max. charge current
Nc = No. of battery cells
W = Weight
Pay attention to the electrical outlet
voltage! Check the label on the bottom
of the charger!
6
7
8
9
10 Trigger switch
Screws
Drill bit
Without torque limitation
Nm Torque
ENGLISH
1,5 m/s²
h,S
Belt hook
Battery pack release button
Battery pack
LED lights
(C)
(A)
(B)
17