Intended Use - Rothenberger ZBS 1 Instrucciones De Uso

EN
Markings in this document:
Danger!
This sign warns against the danger of personal injuries.
Injury / Crushing.
Danger!
Possible hazard from chipping.
Attention!
This sign warns against the danger of property damage and damage to the envi-
ronment. Important note: Failure to comply can lead to malfunctions.
Attention!
Use eye protection.
Failure to comply can result in health damage.
Attention!
Read and follow the operating manual.
Attention!
Visual inspection

Intended use

The device, the pressing jaws and the clamping loops are only for compressing pipes and
fittings. All other applications are considered unintended use. The manufacturer bears no
liability for any results therefrom.
Operating
Note: Make sure that the marks (M) on the sliding segments (C) and the shells (D)
form a line in the starting position (Only press chains in the metal area). If this is
not the case, have the press chains checked.
Inspection: Every 12 months.
Maintenance: We recommend that repairs be done only by our authorized service facilities.
Have your jaw checked at the latest 1 year after the purchase or after 10,000
pressings (according to which occurs first) by an authorised ROTHENBERGER
testing centre, and repeat these checks at the latest 1 year or another 10,000
pressings after the previous inspection. During jaw inspection the jaws are
checked for operating and functional safety and wear parts (e.g. springs) are
exchanged. Jaws which are functionally and operationally safe are returned to
you.
Attention: The nominal width and the pressing contour of the fittings must match the
nominal with and contour of the press chain. Non-compliance leads to incorrect
compression. Follow the fitting manufacturer's assembly instructions.