DRAMINSKI TwistGrain Instrucciones De Uso página 19

If the lower or upper measurement range limit is
exceeded for a sample, the meter will display a
message, such as "< 9 . 0 %" (below the lower limit) or
"> 30 . 0 %" (above the upper limit) . This means that
the sample is out of the range calibrated for the
specific grain species .
The out-of-range results are not included in the
computation of the mean .
IMPORTANT:
Unscrew the cap, empty and clean the sample
compartment after each measurement (carefully
remove the moist residue, for example, with your
finger) .
The cleaning should be particularly thorough on the
change of the grain species and between samples
of significantly different or higher humidity . Because
moisture (such as dew) deposited on grain surfaces
can affect the measurement, "aerate" the sample
before the measurement .
In order to ensure high accuracy of the measurements please
make sure that grain sample and Twist Grain have similar
temperatures. Do not perform measurement of hot grain
sample in cold Twist Grain and cold grain sample in hot Twist
Grain ( i.e. exposed to direct sunlight).
CHAPTER 5 | MEASUREMENTS
EN
17