DRAMINSKI TwistGrain Instrucciones De Uso página 18

After selecting the "Measurement" menu you will
see the list of grain species . The last selected grain
species will be highlighted by default .
1 . Press "t" or "s" to select a name in the list and
press "OK" to accept your selection .
Measurement Durum wheat
Modification
Common wheat
Setup Triticale
ESC OK ESC
t s
Pour
in sample,
tighten the cap
ESC OK
2 . Fill the compartment evenly up to the rim and
clean the thread from grain residue, if necessary .
3 . Tighten the screw cap until you hear the beep
signaling sufficient grain compression.
16 CHAPTER 5 | MEASUREMENTS
OK
t s
4 . Loosen the cap slightly to turn off the beep.
5 . Press "OK" to start your measurement . You will see
the measurement in progress message and after
the meter will display the result in capital digits:
14 .6%
Measurement...
22°C
ESC
The meter saves the reading in memory and displays
the mean of the last 3 measurements above the
temperature result . You can accept the mean as the
final moisture content .
6 . After reading the result please emty the measuring
chamber
7 . To measure next sample of the same grain press
OK . or get back to the list of grains by pressing ESC
Durum wheat
14 .6
%
OK