Setting Up And Making A Mig Weld - Lincoln Electric MARQUETTE AutoPro Serie Manual Del Operador

B-7

SETTING UP AND MAKING A MIG WELD

A. ITEMS NEEDED FOR MIG WELDING
1. .025"(0.6mm) Contact Tip
.025
3. .025"(0.6mm) Dual Groove drive roll is used with L-
56 Solid Mig wire
4. .025"(0.6mm) SuperArc L-56 Solid MIG Wire
5. Nickel gun nozzle
6. Welding Gun
OPERATION
7. Work Cable & Clamp
8. Gas Regulator & Gas Line
9. Bottle of 75/25 Ar/CO
shielding gas) (note this requires a CO
adapter which is sold separately).
MALE END
(REQUIRES ADAPTER
SOLD SEPARATELY)
AUTOPRO™ (140/180 MODELS)
shielding gas (or 100% CO
2
CO
2
100%
B-7
2
regulator
2
FEMALE END
75/25
MIXES