Consumables And Replacement Parts - HYDROLAB HL Serie Manual Del Usuario

2.6 Consumables and replacement parts

Consumables
Description
+
Low NH Ammonium Calibration Solution, 4.62 mg/L-N
4
+
High NH Ammonium Solution, 46.2 mg/L-N
4
Replacement parts
Description
Ammonium/Ammonia sensor cartridge, gray
Sensor cap
Section 3 Blue-green algae freshwater sensors (007293, 007291)
3.1 Specifications
Specifications are subject to change without notice.
Specification
Range
Linearity
MDL ppb
MDL RFU
Parameters
Maximum depth
Operating temperature
3.2 Product overview
Do not put the sensor in red pH 4 buffer. Red pH 4 buffer can cause permanent damage to the sensor lenses. As
an alternative, use pH 4 buffer with no color.
The blue-green algae freshwater sensor is an optical fluorometer that determines the concentration
of blue-green algae in freshwater. Refer to
This sensor is sensitive to light. For the best results, point the end of the sensor away from light
sources.
Figure 3 Blue-green algae freshwater sensor
2
Phycocyanin pigment from Prozyme diluted in deionized water
8 English
Details
0 to 40,000 ppb
2
R = 0.999
2
0.06
0.0002
µg/L, ppb, volts, RFU
Note: ppb is equivilent to ug/L. RFU is 0–100 based on the full detection range of the sensor.
200 m (656 ft)
–5 to 50 °C (23 to 122 °F), non-freezing
N O T I C E
Figure
Quantity
500 mL
500 mL
3.
Item no.
002587HY
002588HY
Item no.
003522
003960