HYDROLAB HL Serie Manual Del Usuario página 39

15.6 Accessories
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Description
Rhodamine Calibration Dye Solution, 21.33 ± 2.5 w/w%
Solid Secondary Standard
Section 16 Temperature sensor (004165HY)
16.1 Specifications
Specifications are subject to change without notice.
Specification
Range
Accuracy
Resolution
Maximum depth
16.2 Product overview
The temperature sensor (004165HY) is shown in
Figure 20 Temperature sensor (004165HY)
16.3 Sensor guidelines
Keep deposits off the sensor for best measurements. Examine the sensor to make sure that there
are no contaminants. Keep the substances shown in
Substance
Oil, sediment or biofilms
16.4 Maintenance
16.4.1 Clean the sensor
To prevent damage to some sensors, do not use solvents that dissolve plastic to clean the sensors.
Note: It may be necessary to clean the sensor more frequently if the sensor is used in environments with sediment
(i.e., silt), mineral precipitate, biofilms, barnacles or pollutants such as oil.
W A R N I N G
Details
–5 to 50 °C (23 to 122 °F), non-freezing
±0.10 °C (±0.18 °F)
0.01 °C (0.02 °F)
200 m (656 ft)
Table 13 Contaminants
Damage
Contaminates the sensor. If the sensor is contaminated, clean the sensor.
N O T I C E
Quantity
236 mL (8 oz)
1
Figure 20.
Table 13 away from the sensor.
Item no.
007273
007726
English 39