Configuration (Dmx); Starting Address - Chauvet DJ GigBAR MOVE Manual De Usuario

Operation

Configuration (DMX)

The GigBAR MOVE works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product's channels could be
restricted.
The GigBAR MOVE uses 3 DMX channels, which defines the highest configurable address to 478.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until DMX is highlighted.
3. Press <ENTER>.
4. Press <ENTER> again.
5. Use <UP> or <DOWN> to select the DMX Channel: 3CH, 17CH, or 35CH.
6. Press <ENTER>
7. Use <UP> or <DOWN> to select Address.
8. Press <ENTER>
9. Use <UP> or <DOWN> to increase or decrease the starting address.
10. Press <ENTER>.
GigBAR MOVE User Manual Rev. 3
http://www.chauvetlighting.com/downloads/
Page 15