Configuration (Standalone); Automatic Mixed Effect Mode; Sound-Active Mixed Effect Mode; Sound Sensitivity - Chauvet DJ GigBAR MOVE Manual De Usuario

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.

Automatic Mixed Effect Mode

To run the GigBAR MOVE in automatic mode, follow the instructions below.
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until AUTO is highlighted.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Mode.
5. Press <ENTER>
6. Use <UP> or <DOWN> to select from the Auto Program options: Mix, Spots, Strobe, Laser,
Derby, Par, S+SP, L+SP, LS, D+SP, DS, DL, P+SP, PS, PL, PD, PS+SP, PL+SP, PLS, PD+SP,
PDS, PDL, DLS+SP, PLS+SP, PDS+SP, PDL+SP, or PDLS.
7. Press <ENTER>.
8. Use <UP> or <DOWN> to select Speed.
9. Press <ENTER>.
10. Use <UP> or <DOWN> to set the automatic program speed from 0–99.
11. Press <ENTER>.

Sound-Active Mixed Effect Mode

To run the GigBAR MOVE in sound-active mode, do the following:
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until SOUND is selected.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Mode.
5. Press <ENTER>
6. Use <UP> or <DOWN> to select from the Auto Program options: Mix, Spots, Strobe, Laser,
Derby, Par, S+SP, L+SP, LS, D+SP, DS, DL, P+SP, PS, PL, PD, PS+SP, PL+SP, PLS, PD+SP,
PDS, PDL, DLS+SP, PLS+SP, PDS+SP, PDL+SP, or PDLS.
7. Press <ENTER>.

Sound Sensitivity

To set the sound sensitivity on the GigBAR MOVE, follow the instructions below.
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until SOUND is selected.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sensitivity.
5. Press <ENTER>
6. Use <UP> or <DOWN> to set the sound sensitivity from 0–99.
7. Press <ENTER>.
• The product will only respond to low frequencies of music (bass and drums).
• The laser will black out when in Sound-Active mode after 3 seconds of silence or noise
below the sensitivity setting.
Page 14
Operation
GigBAR MOVE User Manual Rev. 3