Gaggia ACHILLE Instrucciones De Uso página 18

Keeping it clean:
IMPORTANT: the steam nozzle should be
cleaned after each use in order to avoid build
up of milk deposits that are very difficult to
clean. Cleaning is made easy as can be seen
in the DESCRIPTION OF PARTS. The outer
part of nozzle can be removed by pulling
downward.
1 The outside of the steam pipe can be cleaned
with a damp cloth.
The steam jet is cleaned by running a shot of
steam through it.
The hole in the steam nozzle must be kept
open. A needle may be used.
2 Clean filter holder and filter in warm water
after use.
3 Wipe body of machine with a damp cloth as
required.
4 Remove drip tray and plate (25-12) and
wash in warm soapy water. Do not use abra-
sive substances.
5 Clean the seal (15) inside of the brewing
head (14) and keep it clean.
6 The shower disc (17) should be unscrewed
and cleaned periodically depending on
frequency of use.
7 If the appliance is not used for long periods,
discharge the water in the boiler by rotating
steam knob (7) anticlockwise and pressing
steam button (5) until completely discharged.
Close steam knob (7) by rotating it clockwise
and turn off the appliance.
Never operate pump unless there is water in
tank.
8 NOTE: It is very normal for an espresso
machine to emit steam and drip occasionally
as the water pressure changes during use.
Be certain to empty drip tray (12) as required.
Air intake to be kept
clean and free from
residues
.
• 14 •
E N G L I S H
Pay attention as the
Turbo-Frother
steam nozzle
could be hot!