Legal For Trade - OHAUS Valor 2000 Serie Manual De Instrucciones

Valor 2000 Series Scales
4.5 A OFF Menu
AUTO SHUT OFF
Set the automatic shut off to 5, 10, 15 minutes (shut off
after 5 minutes, etc.) or OFF (scale stays on).
4.6 FILTR Menu
FILTERING LEVEL
Set the filter level to LO (low), MEd (medium), or HI
(high).
4.7 AZT Menu
AUTO ZERO TRACKING RANGE
Set the automatic zero tracking range to OFF, 0.5d, 1d,
3d (divisions).
4.8 LFT Menu
LEGAL FOR TRADE (LFT) MODE
Set the legal for trade status to ON or OFF.
4.9 END
End menu item.

5. LEGAL FOR TRADE

5.1 Settings
Enter the menu to verify the settings and perform a calibration as explained in
Section 4.2. Set the LFT menu to ON.
NOTE: When LFT is set to ON, the following menu settings cannot be
accessed/changed: Calibration, Resolution, Unit, AZT, LFT.
To regain access to the locked menu settings, remove the small cover on
the bottom of the scale. Then during power up press and hold the
recessed lock switch momentarily until zero is displayed.
EN-9