WIKA GFU08 Manual De Instrucciones página 28

7. Display unit
Operating
modes
DISPLAY x 10
EN
HOLD
PEAK
TOTALISER
NUMBER OF
ITEMS
7.5 Tare function
With the tare function, before filling, the weight of the gas cylinder can be tared. With
this, the exact filling weight can be read off the display unit.
7.5.1 Semi-automatic taring
By pressing the TARE button, the weight resting on the scales is tared. The display
indicates "tArE" for a moment and then "0" (net weight). Semi-automatic taring only
occurs when the weight is at least one digit, is stable, and has a valid value, i.e. no
overload condition is allowed.
7.5.2 Taring via the keypad
1. Press the TARE button for a few seconds.
⇒
On the display is indicated: "- tn -", then "000000".
2 Enter the required value via the buttons.
.
→ see chapter 6.1.1 "Numerical input".
3 Confirm with ENTER/PRINT button.
.
⇒
The value will be subtracted from the applied weight. The control light lights up.
28
But- Effect
ton
MODE Activates/deactiva-
tes the 10 x higher
resolution
MODE Activates/deactiva-
tes the weight/hold
function
MODE Activates/deactiva-
tes the peak value
display
MODE Total
Individual weighing
ENTER Total
ENTER 2 seconds: Overall
total
MODE Enters the number
of parts
WIKA operating instructions SF
Button Effect
ENTER MODE button:
a) Changes pieces to
weight
MODE button 2 sec.:
b) Piece
gas filling cart, model GFU08
6
Button