Automatic Cooking - ECG MTD 2071 SE Manual De Instrucciones

When you select the mode, set the clock by turning the controller Time/Menu (Time/Menu) and confirm by pressing Clock/Preset</307
(Clock/Preset) Use the same procedure to set the minutes.
2. Cooking in the microwave oven
1) Select the required power level by pressing the button Power (Microwave power) according to the table below.
2) Using the controller Time/Menu (Time/Menu) set the required cooking time. Maximum cooking time is 95 minutes.
3) Confirm by pressing the button Start/+30SEC (Start/Quick start) and the oven starts to cook.
Cooking power table
Number of POWER LEVEL
presses
1×
2×
3×
4×
5×
6×
GB
Note: If you do not select a power level, the oven will work at maximum power level. You can check the power level during cooking by
pressing the button Power (Microwave power).
3. Quick start
Press repeatedly the button Start/+30SEC (Start/Quick start) to set the cooking time, the oven works at full power. Each press corresponds
to 30 seconds. The longest possible setting in this mode is 10 minutes. After the set time has elapsed, a beep sounds and END is displayed
on the display.
4. Defrosting according to weight
Defrost time and power is set automatically after weight is entered. Weight of frozen foods range: 100–1800 g.
Example: If you want to defrost 600 g of shrimp.
1) Press once the button Weight/Time defrost (Weight/Time defrost).
2) Turn the knob Time/Menu (Time/Menu) to select the weight of the shrimps.
3) Start defrosting by pressing the button Start/+30SEC (Start/Quick start).
Note: During defrosting the cycle stops and a beep sounds – turn the food and resume by pressing the button Start/+30SEC (Start/Quick
start). If you exceed the maximum weight, use the program Time defrost (Time defrost)
5. Defrosting according to time
The oven allows defrosting according to set time.
1) Press twice the Weight/Time defrost button (Weight/Time defrost).
2) Set the defrosting time by turning the Time/Menu (Time/Menu) knob.
3) Start defrosting by pressing the button Start/+30SEC (Start/Quick start).
6. Preset
This function allows you to run one of the previously programmed oven cycles at a set time.
Example: it is 8:00. You want to start cooking at 11:30.
1) Select the required cooking program (except the defrosting and quick start program).
2) Press once the button Clock/Preset (Clock/Preset).
3) Turn the controller to position Time/Menu (Time/Menu) and set the hour to 11:00.
4) Press again the button Clock/Preset (Clock/Preset).
5) Turn the controller Time/Menu (Time/Menu) to set minutes to 11:30.
6) Press once the button Clock/Preset (Clock/Preset).
Note: After setting the Preset, do not use other buttons except to check the Preset time Clock/Preset or to cancel it by pressing Stop/
Cancel. Before using this function, make sure that the microwave time is set correctly.

7. Automatic cooking

You do not need to set the power and cooking time for the following foods. Just enter the food type and its weight/quantity.
72
Cooking power
100 % Heating, milk, boiling water, vegetables, beverages
80 % Rice, fish, chicken, ground meat
60 % Stewing meat, fish
40 % Preparing soups, butter softening
20 % Ice cream softening
0 %
Use