Explanation Of Technical Specifications - Cebora JAGUAR DOUBLE PULSE SOUND MIG 2035/MD Manual De Instrucciones

INSTRUCTION MANUAL FOR WIRE WELDING MACHINE
IMPORTANT: BEFORE STARTING THE EQUIPMENT,
READ THE CONTENTS OF THIS MANUAL, WHICH
MUST BE STORED IN A PLACE FAMILIAR TO ALL
USERS FOR THE ENTIRE OPERATIVE LIFE-SPAN OF
THE MACHINE.
THIS EQUIPMENT MUST BE USED SOLELY FOR WELD-
ING OPERATIONS.
1 SAFETY PRECAUTIONS
WELDING AND ARC CUTTING CAN BE HARMFUL TO
YOURSELF AND OTHERS. The user must therefore be
educated against the hazards, summarized below, deriv-
ing from welding operations. For more detailed informa-
tion, order the manual code 3.300.758
ELECTRIC SHOCK - May be fatal.
• Install and earth the welding machine according
to the applicable regulations.
• Do not touch live electrical parts or electrodes
with bare skin, gloves or wet clothing.
• Isolate yourselves from both the earth and the work-
piece.
• Make sure your working position is safe.
FUMES AND GASES - May be hazardous to your health.
• Keep your head away from fumes.
• Work in the presence of adequate ventilation,
and use ventilators around the arc to prevent
gases from forming in the work area.
ARC RAYS - May injure the eyes and burn the skin.
• Protect your eyes with welding masks fitted with
filtered lenses, and protect your body with appro-
priate safety garments. • Protect others by installing adequate shields or cur-
tains.
RISK OF FIRE AND BURNS
• Sparks (sprays) may cause fires and burn the skin; you should therefore make sure there are no
flammable materials in the area, and wear appro-
priate protective garments.
NOISE This machine does not directly produce noise
exceeding 80dB. The plasma cutting/welding pro-
cedure may produce noise levels beyond said
limit; users must therefore implement all precautions
required by law.
PACEMAKERS
• The magnetic fields created by high currents may affect
the operation of pacemakers. Wearers of vital electronic
equipment (pacemakers) should consult their physician
before beginning any arc welding, cutting, gouging or
spot welding operations.
EXPLOSIONS
• Do not weld in the vicinity of containers under pres-
sure, or in the presence of explosive dust, gases or
fumes. • All cylinders and pressure regulators used in
welding operations should be handled with care.
ELECTROMAGNETIC COMPATIBILITY
This machine is manufactured in compliance with the
instructions contained in the harmonized standard
EN50199, and must be used solely for professional
purposes in an industrial environment. There may be
potential difficulties in ensuring electromagnetic
compatibility in non-industrial environments.
IN CASE OF MALFUNCTIONS, REQUEST ASSISTANCE
FROM QUALIFIED PERSONNEL.
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIP-
MENT
Do not dispose of electrical equipment
together with normal waste!In observance of
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment and its
implementation in accordance with national
law, electrical equipment that has reached the end of its
life must be collected separately and returned to an
environmentally compatible recycling facility. As the
owner of the equipment, you should get information on
approved collection systems from our local representati-
ve. By applying this European Directive you will improve
the environment and human health!
2 GENERAL DESCRIPTIONS
2.1 SPECIFICATIONS
This welding machine is a power source made using
INVERTER technology, suitable for synergic pulsed
MIG/MAG welding, non-pulsed synergic MIG/MAG, con-
ventional MIG/MAG.
The equipment may be used only for the purposes
described in the manual.
The equipment must not be used to defrost pipes.

2.2 EXPLANATION OF TECHNICAL SPECIFICATIONS

IEC 60974.1 The welding machine is manufactured
EN 50199 according to these international standards
N°. Serial number. Must be indicated on any
type of request regarding the welding machine.
single-phase static frequency converter
1 ~
f
1
f
2
transformer-rectifier.
MIG Suitable for MIG welding.
U0. Secondary open-circuit voltage.
X. Duty cycle percentage
The duty cycle expresses the percentage of
10 minutes during which the welding machine
may run at a certain current without overheating.
I2. Welding current
U2. Secondary voltage with current I2
U1. Rated supply voltage
1~ 50/60Hz 50- or 60-Hz single-phase power supply
I Max Max. absorbed current at the corresponding
1
current I and voltage U
2
I eff This is the maximum value of the actual cur-
1
ent absorbed, considering the duty cycle.
This value usually corresponds to the capa-
city of the fuse (delayed type) to be used as
.
2
9