USING THE MANUAL CONTROL
The Manual Control let's you fully control and take advantage of the benefits the
reversible motor technology of your blender and it includes:
• CONTINUOUS BLENDING (Toggle Up) – Motor will turn blade counterclockwise
(see figure 6) at a continuous speed.
®
• REVERSE BLENDING/ PULSE (Toggle Down) – Motor will turn blade clockwise
(see figure 7) at a continuous speed while toggle is held down
To use REVERSE/ PULSE, push toggle down or up for the desired length of time.
Release PULSE and allow blade to stop. Repeat cycle as desired.
IMPORTANT: Do not operate blender continuously for more than 3 minutes.
• Put liquids in the jar first, unless a recipe says otherwise
• Crushing Ice: Crush 6 ice cubes or approximately 2 cups of ice at a time
• Do not remove the lid while in use. Remove feeder cap to add smaller ingredients
(Figure 8)
• Hot Foods: Open the feeder cap to vent steam. Tilt feeder cap away from you. Keep
hands away from the cover opening to prevent possible burns. When working with
hot liquids, remove feeder cap and start blending at a low speed then move to a faster
speed. Do not add liquid over the 4 cup (1 Liter) level
• Cut all firm fruits and vegetables, cooked meats, fish and seafood into pieces no larger
than 3/4 inch (1.8 cm) to 1 inch (2.5 cm). Cut all kinds of cheeses into pieces no larger
than 3/4 inch (1.8 cm)
• REVERSE/ PULSE function should be used to help disloge and mix foods. No cutting
or chopping occurs while using this function.
ALL-METAL DRIVE
®
Figure 6
BLENDING TIPS
ALL-METAL DRIVE
Figure 7
5
®
ALL-METAL DRIVE
®