Connecting The Line Voltage; Product Data - HEIDENHAIN GAGE-CHEK 2000 Manual De Instrucciones

5.10 Connecting the line voltage

WARNING
Risk of electric shock!
Improper grounding of electrical devices may result in
serious personal injury or death by electric shock.
Always use 3-wire power cables
Make sure the ground wire is correctly connected to
the ground of the building's electrical installations
WARNING
Fire hazard due to wrong power cable!
Use of a power cable that does not meet the
requirements of the mounting location may cause a fire
hazard.
Use only a power cable that meets at least the
national requirements of the respective country in
which the product is mounted
Comply with the pin layout
Further information: "X100", Page 182
Connect the power connection to a 3-wire grounded
power outlet using a power cable that meets
requirements
"Product overview", Page 25
Further information:
HEIDENHAIN | GAGE-CHEK 2000 | Installationsanleitung | 12/2018
6 Specifications
6.1 Overview
This chapter contains an overview of the product data
and drawings with the product dimensions and mating
dimensions.
6.2

Product data

Device
Housing Aluminum milled front + cast rear
panel
Housing 200 mm x 169 mm x 41 mm
dimensions
Fastener system, Mounting hole pattern
mating dimen- 50 mm x 50 mm
sions
Display
Visual display unit LCD Widescreen (15:9)
color screen 17 .8 cm (7")
800 x 480 pixels
Display step Selectable, min. 0.00001 mm
User interface User interface (GUI) with touch-
screen
Electrical data
Supply voltage AC 100 V ... 240 V (±10 %)
50 Hz ... 60 Hz (±5 %)
max. input power 38 W
Buffer battery Lithium battery type CR2032; 3.0 V
Overvoltage II
category
Number of 1 (2 additional inputs can be
encoder inputs enabled via software option)
Encoder interfaces 1 V
max. input frequency 400 kHz
11 μA
current 300 mA;
maximum input frequency: 150 kHz
EnDat 2.2: max. current
300 mA
TTL: max. current 300 mA,
max. input frequency 5 MHz
Interpolation at 4096-fold
1 V
PP
Touch probe Voltage supply DC 5 V or DC
connection 12 V
5 V or floating switching output
Four digital inputs:
TTL DC 0 V ... +5 V
One digital output
TTL DC 0 V ... +5 V
Maximum load 1 k Ω
Max. cable length with
HEIDENHAIN cable 30 m
: max. current 300 mA;
PP
: Maximum
PP
27