Neopost DS-62 Manual Del Operador página 49

Symptom
The machine is
not starting after
switching ON
Machine stops
with envelope at
insert position
(flap not open)
Envelopes are
double fed
Envelope stop
skewed
Envelopes are fed
irregularly
48
Possible cause
Machine not
connected to mains
Fuse blown
A cover is opened
Envelopes stacked
reversed in the
hopper
Envelope flap sticks
Wrong envelope type
used (not according
specifications or job
settings)
Envelope separation
not correctly
adjusted
Envelopes not placed
properly in the
hopper
Side guides of the
envelope hopper are
set too wide
Hopper almost empty Refill hopper
Separation set too
narrow
Side guides set too
narrow
Envelope support not
positioned correctly
Remedy
Connect the machine
to the mains
Replace fuse below
power switch
Close the covers
Check envelope feed
adjustments. Place
envelopes correctly
in hopper
Store envelopes
according to
specifications
Change envelopes
according to
specifications
Check separation
settings, adjust if
needed
Check and replace if
needed
Check side guides
and adjust if needed
Check separation
settings, adjust if
needed
Check side guides
and adjust if needed
Reposition the
envelope support
See section
-
-
-
"Loading envelopes" on
page 14
"Envelope settings" on
page 25
Envelope specifications
"Envelope settings" on
page 25
"Technical specifications"
on page 51
"Loading envelopes" on
page 14
"Loading envelopes" on
page 14
"Loading envelopes" on
page 14
"Loading envelopes" on
page 14
"Loading envelopes" on
page 14
"Loading envelopes" on
page 14
"Loading envelopes" on
page 14