Load'n Go - Neopost DS-62 Manual Del Operador

3.7

load'n Go

®
The load'n Go feature automatically adjusts all machine settings.
®
When load'n Go is started, the machine will pick one sheet from each filled feeder.
The picked documents will be folded (if necessary) and inserted into an envelope.
Using load'n Go
1. Load envelopes.
2. Make sure there is sufficient sealing liquid in the
sealing liquid reservoir. If the reservoir has just
been filled, wait approximately 5 minutes for the
brushes to moisten. See "Sealing envelopes" on
page 15.
3. Load the documents face up and leading.
4. From the Main menu 1/3, select
5. After a few seconds, the load'n Go
appear.
6. Select
an envelope.
The envelope will be:
- sealed if sealing is enabled (see "Sealing
envelopes" on page 15).
- ejected into the envelope tray, ready for
inspection.
Address position
1. Check the position of the address in relation to the address window in the envelope.
2. If necessary, select
3. Select
4. Recheck the position of the address, and adjust as required.
16
®
®
to load a folded sheet into
or to adjust the address position.
to make another test run.
.
®
screen will