Tabla de contenido
Idiomas disponibles
Idiomas disponibles
* Please Note: After determining the number of panels being used, the address must be set once before
taking the system into operation for the first time.
DMX-CONTROLLED OPERATION
You can control the panels individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Addressing the controller
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PANELS Rain Drops will respond to the controller.
For address setting, press the MODE button until the display shows "System Mode".
Press the SET UP button until the display shows "DMX Channel". The desired addresses can be selected
via the UP or DOWN buttons.
Controlling:
After having addressed the LED PANELS Rain Drops, you may now start operating it via your LED PANEL
RD Controller DMX.
DMX-protocol
Control Channels
Channel 1
Value:
Option
0-12
Blackout
13-25
Red
26-38
Green
39-51
Yellow
52-64
Blue
65-77
Magenta
78-90
Cyan
91-103
White
104-116 Colour change
117-129 Slow flow 1
130-142 Slow flow 2
143-155 Roll chase 1
156-168 Roll chase 2
169-181 Multi colour
182-194 Fast flow 1
195-207 Fast flow 2
208-220 2 colour chase
221-233 2 colour flow
234-246 Colour fade
247-255 Auto run
Channel 2: Speed
17/35
51930570_V_1_0.DOC
Tabla de contenido
