Interfacing; Introduction; C 520; C 520 L - AKG MicroMic C 520 Manual De Instrucciones

The C 520 /C 520 L is a condenser microphone
and therefore needs a power supply.
Using any power supply other than those rec-
ommended by AKG may damage your micro-
phone and will void the warranty.
1. Connect the phantom power adapter on the
microphone cable to a balanced XLR micro-
phone input with phantom power.
2. Switch the phantom power on. (Refer to the
instruction manual of the unit to which you
connected your C 420.)
1. Plug the mini XLR connector on the micro-
phone cable all the way into one of the two mini
XLR sockets on the B 29, the mini XLR socket
on the connecting cable of the MPA II, or the
input socket on the bodypack transmitter.
The connector will lock automatically.
• To disconnect the cable, press the unlocking
button on the mini XLR connector and pull the
connector out of the socket.
• To a a void d d amaging t t he c c able, n n ever p p ull a a t
the c c able i i tself!
2. B 29 L: Connect the B 29 L to the desired input.
MPA V L: Connect the MPA V L to a balanced
XLR microphone input with phantom power
and switch the phantom power on.
AKG C 520/C 520 L

2 Interfacing

2.1 Introduction

L
!
Important!

2.2 C 520

2.3 C 520 L

2.3.1 B 29 L or
MPA V L
Disconnecting
the cable:
L
!
Important!
15