Installing Dust Filter (Accessory) - L.B.White I-17 Manual Del Usuario E Instrucciones

14
I-17 / I-40 Manual and Spark Ignition
Installing Dust Filter
(Accessory - not included with some models)
Although not required, the filter kit is recommended to
provide additional dust filtration capability and capacity
for Infraconic heaters when installed in severely dusty
environments.
1. Attach filter sleeve to air housing. The air housing tabs fit
into the slots on the sleeve. Rotate the sleeve to lock it
onto the air housing.
2. Position the filter onto the sleeve. Ensure all sleeve
holes are covered by the filter.
3. Securely attach the filter to the sleeve using the beaded
cable tie.
4. Ensure filter does not sag or touch heater's canopy.
FIG. 6
Owner's Manual • I-17 / I-40
INJECTOR
BODY
TABS
FILTER SLEEVE
BEADED
CABLE TIE
DUST FILTER