Tabla de contenido
POWR
70 Nm (7.0 mSkg, 50 ftSlb)
Step
Procedure/Part name
6
Idle gear assembly
7
Base assembly
FLYWHEEL MAGNETO AND BASE
Q'ty
NOTE:
1
Fill the flywheel cover groove with
water resistant grease.
NOTE:
1
Align the punch mark on the crankcase
with the punch mark on the base
assembly.
Reverse the removal steps for
installation.
31
37 Nm (3.7 mSkg, 27 ftSlb)
Service points
Tabla de contenido
