Progress PHN 1320 Instrucciones De Uso página 18

18 progress
Models in stainless steel or aluminium:
Clean the oven door and operating panel in
stainless steel or aluminium with a damp
sponge and then dry carefully with a soft cloth.
Never use metal pads, metal wool, acids or
abrasives for cleaning because they may
scratch the surfaces.
Cleaning the oven door seal
A seal is attached around the opening of the
oven.
Regularly check the condition of
the seal. Clean the seal if neces-
sary without using any abrasive
materials or objects. If you find
that the seal is damaged, call your
nearest service centre immedi-
ately. Do not use the oven until the
seal has been changed.
Grill heating element
This model has been fitted with a hinged grill
element to enable you to clean the roof of
the oven easily.
First ensure that the oven has
cooled down and has been discon-
nected from the mains.
1. Loosen the screw that fixes the grill ele-
ment in position. When carrying out this
operation for the first time, we recom-
mend using a screwdriver.
2. Carefully lower the grill element so that
the oven roof becomes accessible.
3. Clean the oven roof with a suitable
cleaner and wipe dry before replacing
the hinged grill element.
4. Gently push the grill element back into
place and firmly screw into position with
the retaining nut.
Ensure the retaining nut on the
grill element is properly tightened
so that it does not fall down when
in use.