Troubleshooting - VITO 30 Manual De Instrucciones

15. Troubleshooting

Malfunction
Power indicator (1) stays inactive
VITO makes loud noises at
filtration
Power indicator (1) flashes and/or
acoustic indicator is beeping (VITO
80 beeps additionally)
Power indicator (1) and filtration in-
dicator (2) flashing (VITO 80 beeps
additionally)
VITO cannot be started
Line fuse / Ground fault circuit
interrupter (GFCI) blowout
Low filtration performance
Oil splashes at sides / on top
LEDs flash 10 sec. after plugging in
Should other issues appear, get in contact with the customer support or your local dealer!
Contact details on page 2 chapter Legal information.
Possible cause
• Power cord (8) not plugged in
• Power cord (8) / connector is
defective
• Star handles (5) are too loose
• Rotor scratches on the fryer
• Rotor defective
• overheating protection is
activated
• VITO is tilted more than 15°
• Strong vibrations
• Control unit (6) defective
• Net protection or other electron-
ic components are blocking
• Rotor defective
• Circuit overloaded
• Particle filter is full
• Pump pipe is blocked
• Motor is defective
• Particle filter blocked
• Too much space between filter
lid and pump filter unit (9)
• Filter is inserted incorrectly
• Push button (3) is defective
• Control unit (6) wet inside
Remedial action
• Plug in VITO
• Please contact service
• Tighten star handles (5)
• Alter position of VITO in the
fryer
• Please contact service
• let the device cool down
• Check position of VITO
• Check position of VITO
• defective turning part
• Please contact service
• Change power outlet, elec.
circuit
• Please contact service
• Change power outlet, elec.
circuit
• Change filter
• Empty pump-filter unit (9)
• Deep clean (boil-out)
• Please contact service
• Change filter / clean unit
• Adjust filter sealing sheet
• Insert filter correctly
• Please contact service
• Let it dry
Page 9