Location Requirements - Haier HMV1472BHS Instrucciones De Instalación

Nylon Grommet (for metal
cabinets)
Glass Tray
PARTS NEEDED
•
M6-1.00 Self-aligning Machine Screw (2) - of the length needed to go through
the cabinet bottom, filler block (if needed for recessed bottom cabinets), and
into the top of the microwave.

LOCATION REQUIREMENTS

a
16½" (42 cm)
24" (61.0 cm)
d
•
The space between the cabinets on each side of the range must be at least 24"
(61 cm) wide and free of obstructions.
•
Grounded electrical outlet inside overhead cabinet. See "Electrical
Requirements" section.
•
If you are going to vent the microwave oven to the outside, see "Install
Microwave Oven" for exhaust and duct preparation.
•
When installing the microwave oven beneath smooth, flat cabinets, follow the
instructions on the Top Cabinet template for power cord clearance.
TOP CABINET TEMPLATE
Top Cabinet Template
Turntable Ring
b
30"
(76.2 cm)
min.
c
4
REAR WALL TEMPLATE
Rear Wall Template
Grounded 3 Prong Outlet
A
Bottom edge of cabinet
B
needs to be 30" (76.2 cm)
or more from the cooking
surface.
Backsplash
C
66" (167.6 cm) or more
D
from the floor to the top
of the microwave