Haier HMV1472BHS Instrucciones De Instalación página 10

STYLE 2 - FRAMED, RECESSED CABINET
IMPORTANT:
The microwave must be level. Use a carpenter's level to make
sure the cabinet bottom is level.
1. Draw a vertical line on the wall at the center of the 24" (61 cm) wide opening.
2. Place the Mounting Plate/Rear Wall Template onto the wall so that the
centerline of the template is aligned with the center line, and the top of the
template is touching the bottom of the cabinet. Tape the template in this
position.
NOTE :
IT IS VERY
READ AND FOLL IMPO RTAN
IN THE T TO
INST ALLA OW THE
BEFO RE TION INST DIRE CTIO
REAR PRO CEED RUC TION NS
WAL L ING WITH S
This Rear TEMP LATE THIS 3/8" TO EDGE
mounti ng Wall Templa .
outlet. plate and te serves to position 12"
to locate the horizon the bottom
1. Use a level tal exhaus
accura tely. to check that the t
2. Locate templa te
right side and mark at least is position ed
of the centerl one stud 4"
It is importa ine. on the left
screw mounte nt to use or
of the microw d firmly in a stud at least one wood
location ave. Mark to suppor
3. Drill holes s for the supplie two addition t the weight
in the marked d toggle al, evenly spaced
a stud, drill a 3/16" location bolts.
that do hole for s. Where
toggle bolts. not line up with wood screws there is
a stud, drill 5/8" . For holes
DO NOT holes for
AT THIS TIME. INSTAL L THE MOUN
4. Remov TING PLATE
5. Review e the templa
installa tion the Installa te from the rear
situatio tion Instruc tion book wall.
n. for your
Darle vuelta
versió n en Españ a la hoja para consu
ol. ltar la
Locat e
and mark
moun ting holes to
plate. align with
IMPO RTAN holes in
T: the
LOCA TE
AT LEAS
THE CENT T ONE
MAR K ERLI NE. STUD ON EITH
THE LOCA ER SIDE
SPAC ED TION FOR OF
TOGG 2 ADDI
AREA . LE BOLT TION AL,
S IN THE EVEN LY
MOU NTIN
G PLAT
E
Trim the
rear wall
temp late
along the dotte
d line.
a
STYLE 3 - RECESSED CABINET WITH FRONT OVERHANG OR
DECORATIVE TRIM
IMPORTANT:
•
The microwave must be level. Use a carpenter's level to make sure the
cabinet bottom is level.
•
If a decorative cabinet trim is interfering with the installation and leveling of
the microwave oven, remove the decorative trim.
•
If the cabinets have a front overhang, but no back or side overhang, to keep
the microwave level, place the mounting plate so that the distance from the
top of the mounting plate to the cabinet bottom is equal to the distance
from the bottom of the front overhang to the bottom of the cabinet.
(41.9 cm)
a
Trim the
rear wall
temp late
along the dotte
d line.
Loca te
and mark
moun ting holes to
plate . align with
IMPO RTAN holes in
T: the
LOCA TE
THE CENT AT LEAS T ONE
ERLI NE. STUD
MAR K ON EITH
THE LOCA ER SIDE
SPAC ED TION FOR OF
TOGG 2 ADDI
AREA . LE BOLT TION AL,
S IN THE EVEN LY
MOU NTIN
G PLAT
E
b
A
16½"
Center Line
A
30" (76.2 cm) to
B
cooktop
8
Center
Line