Makita PW5000C Manual De Instrucciones página 7

OPERATION
Polishing operation (Fig. 9)
WARNING:
• To reduce the risk of electric shock, check the tool's
water supply system to ensure there is no damage to
the seals ("o" rings) or hoses. A damaged water supply
system may result in abnormal water flow to the tool,
which could be dangerous.
CAUTION:
• Always wear safety goggles or a face shield during
operation.
• Never switch on the tool when it is in contact with the
workpiece, it may cause an injury to operator.
• Never run the tool without the abrasive disc. You may
seriously damage the pad.
• Be sure to feed water to the abrasive disc during opera-
tion. Failure to do so may cause breakage to the tool. • The temperature of water to be used should be within
the range of 0°C – 40°C (32°F – 104°F). Use of freez-
ing or hot water beyond this range may cause damage
to the tool.
• The maximum permitted pressure of water supply is
7 bar.
Make sure that the cock is closed. Connect the hose to
the tool. Make sure that water comes out when the water
lever is opened.
Hold the tool firmly. Turn the tool on and then apply the
abrasive disc to the workpiece.
Apply slight pressure only. Excessive pressure will result
in poor performance and premature wear to abrasive
disc.
MAINTENA NCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
The tool and its air vents have to be kept clean. Regularly
clean the tool's air vents or whenever the vents start to
become obstructed. (Fig. 10)
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by Mak-
ita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Abrasive discs
• Side grip
7