Bevel Stop 45° Right And Left Adjustment - Skil MS6305-00 Manual Del Propietário

9. Loosen the bevel-lock knob.
10. Adjust 0° bevel-adjustment screw with a M4 hex wrench (not supplied) to bring the saw
blade into alignment with the square.
11. After squaring adjustments have been made, make sure to use the supplied Double-
Ended Allen Wrench to loosen the indicator screw to adjust the bevel-scale pointer and
reset it to zero (Fig.24). Tighten the bevel-lock knob.
Fig. 23
0° bevel-
adjustment screw
inside the casing
M4 Hex Wrench
(not supplied)
Bevel stop 45° right and left adjustment
To adjust the left 45° bevel angle
1. Loosen the bevel-lock knob and
NOTICE: Move the 45° bevel stop to the far left; the bevel angle can be quickly set to 45°.
Move the 45° bevel stop to the far right; the bevel angle can be set to 48°.
2. Move the sliding fence to clear the head assembly. Rotate the head assembly until the
bevel-stop bolt hits the 45° left bevel stop (Fig.26).
Fig. 25
Bevel-lock
Knob
Bevel stop bolt
o
45 Bevel stop
28
(Fig.23)
Fig. 24
move the 45°bevel stop to the far left (Fig.25).
Fig. 26