Master PH-1000 Manual De Instrucciones página 6

1400/2400 LCD Dial-In Heat Gun
HEAT
COOL
OFF
10
PH-1400/2400
Operating Instructions
1) Plug heat gun into properly rated
outlet.
2) For COOL temperature, press the
switch to the center position (I).
3) For HEAT, press the switch to
the high position (II). It is important
to press the switch progressively
through each position. If you press
directly from O to II, the heat gun
will not operate and 'OFF' will show
in the display. If this happens, return
the switch to O then press to I and
then to II.
4) For OFF, press switch to the O
position.
www.masterappliance.com
1600/2600 Surface Temperature Control
Heat Gun
To adjust the airflow, twist left knob.
The number of bars on the left side of
the LCD corresponds to the amount of
airflow.
To lock temperature and air flow,
press the magnet key to the back of
the heat gun just under the left knob.
The LCD shows a lock icon under the
temperature readout. Settings cannot be
changed if this icon shows as locked.
www.masterappliance.com
To adjust the heat, twist right knob.
The number of bars on the right side of
the LCD corresponds to the amount of
heat. The set temperature will display
for 2 seconds, then switch to the actual
temperature.
To change the temperature between
Fahrenheit and Celsius, press the
magnet key supplied with the heat gun
to the back of the gun just under the
right knob for 5 seconds.
11