Standard Accessories; Battery Removal/Installation - HIKOKI G 14DMR Instrucciones De Manejo

SPECIFICATIONS
Cordless disc grinder
Model
Voltage
Rated speed
outer dia. × hole dia.
Wheel
peripheral speed
Rechargeable battery
Weight
Charger
Model
Charging voltage
Charging time
Weight
Charge time is approximate. Actual charge time may vary.
"x" Indicates that the battery pack is not compatible with that specific charger.

STANDARD ACCESSORIES

1 Depressed center wheel ........ 1
G14DMR (2BGK) 2 Wrench ..................................... 1
G14DL (2MRK) 3 Side handle ............................. 1
G18DMR (2BGK) 4 Charger ..................................... 1
5 Battery ...................................... 2
G18DL (2MRK)
6 Plastic case .............................. 1
1 Depressed center wheel ........ 1
G14DMR (BGK) 2 Wrench ..................................... 1
3 Side handle ............................. 1
G14DL (MRK)
G18DMR (BGK) 4 Charger ..................................... 1
G18DL (MRK) 5 Battery ...................................... 1
6 Plastic case .............................. 1
G14DMR (NN)
G14DL (NN) Without charger, battery,
G18DMR (NN) plastic case
G18DL (NN)
Standard accessories are subject to change without
notice.
G14DMR
EB14B:Ni-Cd
2.0 Ah
(12 cells)
EB1426H: Ni-MH
2.6 Ah
(12 cells)
EB1430H: Ni-MH
3.0 Ah
(12 cells)
EB1433X: Ni-MH
3.3 Ah
(12 cells)
2.1 Kg
UC14YFA
7.2 – 14.4 V
2.0 Ah : Ni-Cd 50 min.
2.6 Ah : Ni-MH 65 min.
3.0 Ah : Ni-MH 70 min.
3.3 Ah : Ni-MH 75 min.
3.0 Ah : Li-ion
0.6 Kg
G14DL
14.4V
9300 min -1
115 × 22.23 mm
x
x
BCL1430: Li-ion
(4 or 8 cells)
EBL1430: Li-ion
(4 cells)
x
1.8 Kg
UC24YFA
7.2 – 24 V
50 min.
65 min.
70 min.
75 min.
x x
0.6 Kg
APPLICATIONS
Removal of casting fin and finishing of various
types of steel, bronze and aluminum materials and
castings.
Grinding of welded sections or sections cut by
means of a cutting torch.
Grinding of synthetic resins, slate, brick, marble, etc.
Cutting of synthetic concrete, stone, brick, marble,
and similar materials.

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch
to remove the battery (See Fig. 1).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (See
Fig. 1).
English
G18DMR
18V
9100 min -1
80 m/s
EB1820L: Ni-Cd
(15 cells)
EB1826H: Ni-MH
(15 cells)
EB1830H: Ni-MH EBM1830: Li-ion
(15 cells) (10 cells)
EB1833X: Ni-MH
(15 cells)
2.3 Kg
UC18YG UC18YRL
7.2 – 18 V 7.2 – 18 V
50 min. 30 min.
x 40 min.
x 45 min.
x 50 min.
x 45 min.
0.3 Kg
G18DL
x
x
x
1.9 Kg
0.6 Kg
9