Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TRSL 1400
FEATURES
− Suitable for carrying liquids or solids maintaining the temperature several hours.
− Keeps drinks and food hot or cold.
− Double inner liner.
− Made of stainless steel.
− Its dual interior wall stainless steel vacuum chamber provides a maximum thermal
efficiency.
− Sealing system.
− Screw-top.
− Includes handle.
− Capacity: 1400ml.
INSTRUCTIONS FOR USE
− Before first use, wash the product.
− To maintain maximum duration of heat, it is advisable to pre- heat it. Pour boiling water or
ice and keep it closed for a few minutes.
− Is advisable not to open the lid until using to keep the temperature.
− The heat provides maximum performance at 80% filling. If filling is less, the temperature
may vary more rapidly. For the safety and health of your child WARNING! Always use this
product under the supervision of an adult.
− Before each use, inspect the product. Discard the first sign of damage or weakness.
− Always check food temperature before administering them his son.
− Keep out of reach of children all components that are not in use.
− The duration of the indoor temperature always depends on the temperature wherein outer
container is located.
− When filling, always leave a gap of 1 cm.
− You should always transport it upright.
− Never put in the microwave, electric ovens or directly over the fire.
− Do not put carbonated drinks.
− Do not use milk or dairy baby food (may be cut). Remember that the liquid inside may be
very hot and could cause burns to the skin. Do not place it in the microwave. Keep out of
reach of children.
CLEANING AND MAINTENANCE
− When using for the first time and also in periods longer than 3 months, clean the inside
with warm water using a mild detergent and rinse thoroughly.
− Wash inside using liquid soap and a soft bristle brush. It is advisable to wash after each
use. Unscrew the lid and use a bacteriologically safe brush.
− No need to sterilize the components of heat, but if you want to, you can use a cold
sterilization method. Never use a method in hot (boiling, with microwave...), as the plastic is
susceptible to a temperature above 85 °.
6
Tabla de contenido
