Iomega Ditto Tape Drive Manual Del Usuario página 5

Your Ditto 2GB Tape Drive Your Ditto 2GB Tape Drive Your Ditto 2GB Tape Drive
Your Ditto 2GB Tape Drive Your Ditto 2GB Tape Drive
Inserting and Removing Tapes
Grip and insert your tape minicartridge as illustrated below. Push past the
spring resistance of the drive until the minicartridge snaps into place, leaving
about 3 cm (about one and one-quarter inches) still outside the drive. To
remove the tape minicartridge from the drive, grip as before and pull it straight
out of the drive. Do not remove the minicartridge if the drive activity light is
on and blinking. Remove tapes when not in use.
Tape Capacity and Compatibility
The Ditto 2GB tape is preformatted for you. The formatted capacity is
1000MB (mega-bytes). Compressing your raw data by a 2:1 ratio
(compression ratios depend on data type) allows you to store up to 2000MB of
data.* Ditto 2GB drives will read and write as shown in the following table.
We recommend using only Ditto 2GB tapes.
Compatible
2GB Drive(s) Tape Format
2GB
2GB
2GB
2GB
2GB
2GB
2GB
2GB
2GB
*The Ditto 3.7GB tape for the Ditto 2GB drive will soon be available.
Ditto 2GB
Ditto 2GB
QIC-3020 Travan
QIC-3020 Wide
QIC-3020
QIC-80 Travan
QIC-80 Wide
QIC-80XL
QIC-80
Tape Type Read
Ditto 2GB YES
Ditto 3.7GB* YES
TR-3 YES
3020XLF YES
3020XL YES
TR-1 YES
5122 YES
2120XL YES
2080 or 2120 YES
Write
YES
YES
NO
NO
NO
NO
NO
NO
NO
5