Disposal Of The Packaging; Operating Components; Handling And Operation; Switching The Appliance On/Off - Tronic TLGL 1000 B1 Instrucciones De Uso

Disposal of the packaging

The packaging protects the device from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces the amount of waste generated. Dispose of packaging material
that is no longer needed as per the regionally established regulations.
NOTICE
► If possible preserve the device's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the
device ideally for its return.

Operating components

Display
Operating status display (charging slots 1 to 4)
2
3 USB Output
Operating status display (Li-ion batteries)
4
Charging contact for Li-ion batteries
5
Holder for Li-ion batteries
6
Charging slots for types AAA/AA/C/D (charging slots 1 to 4)
7

Handling and operation

In this chapter you will receive important information for the handling and
operation of the device.
Switching the appliance on/off
♦ Place the appliance on a smooth, level and slip resistant surface.
♦ Compare the technical details with those of your power supplier. If they
match, connect the mains cable to an easily accessible mains power socket.
The LEDs light up red three times. The battery charger is now ready for use.
♦ To switch off the battery charger, unplug the appliance from the mains
socket.
NOTE
► Between 1 and 7 batteries can be charged individually:
- 4 x type C or type D batteries in the charging slots 1 to 4
Li-ion battery (3.6–3.7 V) on the charging contacts
or
- 6 x type AA or AAA batteries in the charging slots 1 to 4
Li-ion battery (3.6–3.7 V) on the charging contacts
│ GB │ IE
■
20
, plus 1 x
7
5
, plus 1 x
7
5
TLGL 1000 B1