Cleaning And Maintenance - Domo DO720K Manual De Instrucciones

HOT WATER FEATURE
1. Place a cup under the steam nozzle.
2. In standby mode, turn the rotary knob to the hot water feature indicator lamp.
emitted from the steam nozzle and the indicator lamp blinks.
3. Turn the rotary knob back to the middle position to finish.
Note: the maximum amount of hot water you can produce with this feature is 180-220 ml.

CLEANING AND MAINTENANCE

! Note: Before cleaning the unit, pull the plug out of the power socket and let the unit cool down. To
avoid the risk of electric shock, never immerse the cord, plug, or unit in water or other liquids.
· Clean all removable parts (filters, portafilter, tamper, milk jug, drip tray, and grille) with clean warm
water after use. Never use aggressive or abrasive cleaning agents. Dry off the parts before putting
them back.
! Note: these parts are not dishwasher safe.
· Wipe the unit housing clean with a soft, damp cloth to remove stains.
· Flush the unit regularly by brewing without putting ground coffee in the filter.
· Flush out the steam nozzle regularly by using the hot water feature. You can clear the
opening of the nozzle with the large needle of the cleaning pin.
· If filter holes are clogged, you can clear them with the small needle of the cleaning pin.
Cleaning the grinder
We recommend you clean the grinder every two weeks. Clean it earlier if you notice that the grinder
produces less ground coffee. If you set the coarseness to a fine grind setting, you may need to clean the
grinder more often.
1. Make sure the bean reservoir is empty before cleaning the grinder. Press the grind button until the
remaining coffee beans are ground and the reservoir and grinder are empty.
2. Remove the bean reservoir. Rotate the reservoir anticlockwise until the number markings are at the
back. The reservoir clicks loose and you can lift it out of the unit.
3. Remove the grinder. Hold the grinder by the iron handle and loosen it anticlockwise. Lift the grinder
out of the unit.
4. Using the cleaning brush to clean both parts of the grinder, both the part that you just removed and
the part that is integrated into the unit. You can find the brush in the accessory storage space behind
the drip tray.
! Note: do not clean the grinder with water.
5. Regularly clean the shaft of the grinder outlet using the brush supplied to avoid or remove build-up.
6. Return everything to its original position.
46
DO720K
1 2
Hot water will be
3