Tabla de contenido
Idiomas disponibles
Idiomas disponibles
20. NEVER CARRY TOOL BY HOSE.
21. DO NOT OVERREACH.
Keep proper footing and balance at all times .
22. NEVER USE TOOL WHICH IS DEFECTIVE OR OPERATING ABNORMALLY.
If the Tool appears to be operating unusually, making strange noises, or otherwise appears defective,
stop using it immediately and arrange for repairs by a Porta-Nails authorized
service center .
23. DISCONNECT AIR HOSE FROM TOOL WHEN:
1) Doing maintenance and inspection;
2) Loading fasteners;
3) Clearing a jam;
4) It is not in use;
5) Leaving work area;
6) Moving it to another location; and
7) Handing it to another person .
Never attempt to clear a jam or repair the Tool unless you have disconnected air hose from the Tool and
removed all remaining fasteners from the Tool . The Tool should never be left unattended since people
who are not familiar with the Tool might handle it and injure themselves .
24. STAY ALERT.
Watch what you are doing . Use common sense . Do not operate the Tool when you are tired . The Tool
should never be used by you if you are under the influence of alcohol, drugs or medication that makes
you drowsy .
25. HANDLE TOOL CORRECTLY.
Operate the Tool according to the Manual . Never allow the Tool to be operated by children, individuals
unfamiliar with its operation or unauthorized personnel .
26. NEVER USE TOOL FOR APPLICATIONS OTHER THAN THOSE SPECIFIED IN THIS MANUAL.
27. HANDLE TOOL CAREFULLY.
Because of high air pressure in the Tool, cracks in the surface are dangerous . To avoid this, do not drop
the Tool or strike the Tool against hard surfaces; and do not scratch or engrave signs on the Tool . Handle
the Tool carefully .
28. MAINTAIN TOOL WITH CARE.
Keep the Tool clean and lubricated for better and safer performance .
29. USE ONLY PARTS, ACCESSORIES OR FASTENERS SUPPLIED OR RECOMMENDED BY Porta-Nails.
Unauthorized parts, accessories, or fasteners may void your warranty and can lead to malfunction and
resulting injuries . Only service personnel trained by Porta-Nails, distributor or employer shall repair the
Tool .
30. NEVER MODIFY OR ALTER A TOOL.
Doing so may cause it to malfunction and personal injuries may result .
SAFETY
(continued)
6
Tabla de contenido
