Installation - Hatco FS2HAC Serie Manual De Instalación Y Operación

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
General
WARNING
ElECTRIC SHOCk HazaRD:
• Plug unit into a properly grounded electrical receptacle
of the correct voltage, size, and plug configuration. If
plug and receptacle do not match, contact a qualified
electrician to determine and install proper voltage and
size electrical receptacle.
• Units supplied without an electrical plug require field
installation of proper plug. Plug must be properly
grounded
and
of
configuration for electrical specifications of unit.
Contact a qualified electrician to determine and install
proper electrical plug.
• Unit is not weatherproof. locate unit indoors where
ambient air temperature is a minimum of 21°C (70°F).
FIRE HazaRD: locate unit a minimum of 25 mm (1") from
combustible walls and materials. If safe distances are not
maintained, discoloration or combustion could occur.
CAUTION
locate unit at proper counter height in an area that is
convenient for use. location should be level to prevent
unit or its contents from falling accidentally and strong
enough to support weight of unit and contents.
NOTE: To prevent delay in obtaining warranty coverage,
complete online warranty registration. See the
details.
IMPORTaNT NOTE
correct
voltage,
size,
section for
Installing 102 mm (4") legs
The National Sanitation Foundation (NSF) requires that
units over 914 mm (36") in length or weighing more than 36
kg (80 lbs.) either be sealed to or raised above the
installation surface. If this unit cannot be sealed at the
point of use, 102 mm (4") legs are included to allow for
proper cleaning access below the unit.
and
Do not lay unit on the side with the control panel or
damage to unit could occur.
NOTE: Additional help may be needed to maneuver the unit
to the proper position for installing legs.
Shorten
Adjustable tip for leveling.
NOTE: The feet on the 102 mm (4") legs are adjustable for
leveling the unit. Use an adjustable wrench to make
leveling adjustments once the unit is placed in its final
position.

INSTallaTION

CAUTION
NOTICE
Lengthen
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Fs2hac-2ptFs2hac-4pt

Tabla de contenido