Special picture playback
and picture/sound effect
You can view continuous still images, or zoom in or out of
the picture. You can also adjust the picture characteristics, as
well as simulate surround sound using a stereo system.
To display continuous still pictures
[STROBE]
CH
+
VOL-
ENTER
CH
-
PREVIOUS
CLEAR
SELECT
SLOW-
REPEAT
SUB TITLE
AUDIO
DIGEST
ANGLE
3D
PHONIC
RM-SXV010U
REMOTE CONTROL
¶ During playback
1
At the point where you want to begin viewing
continuous still images, press 8.
The unit pauses playback.
2
Press and hold 8 for more than 1 second.
Nine copies of the same frame (still images) will
appear on the TV screen.
You can advance these frames using the following
step.
3
Press 8 once.
The image in the middle of the top row shows the
next frame of video after the one on the upper left.
Advanced frame
Each press of 8 advances the video by one frame.
Pressing 3 instead of 8 advances each frame at
normal playback speed with a time delay over the
whole nine pictures (while the sound is muted).
• To return to the normal screen
Press and hold 8 for more than 1 second.
NOTE
• If you press and hold 8 for more than 1 second during
playback, nine still pictures also appear but they
advance at normal playback speed (while the sound is
muted).
Available :
VOL+
NEXT
STROBE
8
SLOW+
VFP
PROGRESSSIVE
SCAN
ZOOM
AMP VOL
To zoom in or out pictures [ZOOM]
TV1
1
TV4
4
TV7
7
TV-/--
10
RETURN
SUBTITLE
CH
+
VOL-
ENTER
CH
-
PREVIOUS
CLEAR
SLOW-
REPEAT
SUB TITLE
DIGEST
ANGLE
3D
PHONIC
RM-SXV010U
REMOTE CONTROL
¶ During playback or while paused
1
Press ZOOM + or –.
Pressing ZOOM + causes the unit to zoom in on the
image, and pressing ZOOM – causes the unit to
zoom out.
Each time you press ZOOM +, the magnification is
doubled (up to × 1024).
Each time you press ZOOM –, the magnification is
halved (down to × 1/8).
ZOOM x 4
At the top left of the screen, the information for the
current magnification appears for 5 seconds. While
zoomed in, an indication of the zoomed image
position also is displayed. The next step can be
used to move the image position.
2
Use 5/∞/2/3 to move the zoomed position.
If no button pressed for 5 seconds, the information
for the current magnification disappears.
To display the information, press ZOOM +/– or 5/∞/
2/3 again.
ZOOM x 4
Advanced operations
Available :
TV2
TV3
2
3
TV5
TV6
5
6
TV8
TV9
8
9
TV0
MUTING
0
+10
TITLE/
TV/VIDEO
GROUP
CANCEL
VOL+
5/∞/2/3
NEXT
SELECT
STROBE
SLOW+
AUDIO
VFP
ZOOM +/–
ZOOM
AMP VOL
English
33