Danger Of Explosion; Dangers Due To Electrical Power - CASO DESIGN EMCG 32 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 134

10.3.4 Danger of explosion

Warning
There is a danger of explosion due to excess pressure that is created in the event the
device is not used properly.
Observe the following safety notices to avoid dangers of an explosion:
► Liquids and other food must not be heated in closed vessels as these may explode.
► When heating food in plastic containers do not leave the appliance unsupervised (risk
of ignition).
► Remove the sealing caps and nipples on baby bottles.
► Do not use dishes with hollow handles and buttons on lids for cooking in which liquid
can get inside the voids if these voids are not sufficiently vented.
► Do not cook eggs in the shell or extremely hard boiled eggs in the device as they can
still explode, even after the microwave operation has been completed.
► Remove twisted wire closures on paper or plastic bags so that no excessive pressure
can develop.

10.3.5 Dangers due to electrical power

Danger
Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or subassemblies!
Observe the following safety notices to avoid dangers due to electrical power:
► If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
► If the connection lead is damaged, you will need to have a special connection lead
installed by an authorized electrician.
► Do not operate this device if its power cable or plug is damaged, if it does not work
properly or if it is damaged or has been dropped. If the power cable is damaged, it will
need to be replaced by the manufacturer or his service agency or a similar qualified
person, to avoid any dangers.
► Do not open the housing on the device under any circumstances. There is a danger of
an electrical shock if live connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device can also occur.
► Ensure that the appliance is switched off before replacing the lamp to prevent the risk
of electric shock.
caso EMCG 32
51
Tabla de contenido
loading

Tabla de contenido