Control Panel - Husqvarna AUTOMOWER 105 Manual De Usuario

WARNING:
Install only to an earth-fault breaker (RCD)
when connecting the power supply to the
wall socket. For USA/CANADA: Use a
covered Class A GFCI receptacle (RCD)
that has an enclosure that is weatherproof
with the attachment plug cap inserted or
removed.
WARNING:
supply must be changed or tampered with.
The low voltage cable must not be
shortened or extended.
Low-voltage cables of different lengths are available as
accessories.
WARNING:
and extension cable must be outside the
work area to avoid damage to the cables.
WARNING:
circumstances mount the power supply at a
height where there is a risk it can be
submerged in water (at minimum 30 cm /
12" from the ground). It is not permitted to
place the power supply on the ground.
min 30 cm / 12"
WARNING:
the charging station, for instance before
cleaning the charging station or repairing the
loop wire.
WARNING:
and adjust the cutting height so that the
blades on the blade disc can never come in
contact with the cable.
WARNING:
damage to electrical components,
disconnect all connections to the charging
12 - Installation
Risk of Electric Shock.
No parts of the power
The power supply cable
Do not under any
Use the plug to disconnect
Place the low voltage cable
To reduce the risk of
station (power supply, boundary wire and
guide wires) if there is a risk of a
thunderstorm.
WARNING:
power supply. Condensed water can harm
the power supply and increase the risk of
electrical shock.
For more instructions on how to do a proper installation,
refer to chapter Installation in the complete Operator's
manual on Husqvarna's website www.husqvarna.com.

3.2 Control panel

All commands and settings for the product are made via
the control panel. All functions are accessed via a
number of menus.
The control panel consists of a display and a keypad. All
information is shown on the display and all input is done
using the buttons.
Note:
The display texts are shown in English in the
manual, but you will see the texts on the product display
in the chosen language.
3.3 Display Automower
When the STOP button has been pushed and the hatch
is opened, the operation window appears showing the
time, selected operating mode, number of mowing
hours, battery status and timer setting.
• The clock shows the current time.
• Date shows the current day.
• The number of operating hours indicates the
number of hours since the day of manufacture that
the product has been in operation. The time that
the product has spent mowing or searching for the
charging station is counted as operating time.
• AUTO , MAN or HOME show which mode of
operation is selected.
• The battery status shows the remaining battery
charge.
• The ECO symbol is displayed if the product is set
ECO mode .
in
• The clock symbol indicates when the timer settings
are set. The clock symbol is black when the
Do not encapsulate the
®
105
1418 - 007 - 17.09.2020