AEG SWD81800G1 Manual De Instrucciones página 16

16 www.aeg.com
• The sealing strip is attached tightly to
the cabinet.
6.5 Assembly instructions for the compensator lower part of the
door
• The door opens and closes correctly.
With the door open, loosen the two
screws situated in the lower part with-
out unscrewing them completely.
Position the steel compensator as in-
dicated in the figure and insert the up-
per part under the head of the screws.
Align the compensator with the steel
door panel and tighten the screws.
Insert the steel carter inside the com-
pensator as indicated in the figure.