Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Electronic Controls
For your convenience,
your controls are preset at the factory.
When installing your refdgerator, make sure that the controls are
still preset to the "mid-settings"
as shown.
FREI_B{
REFRI6ERATOR
COLD
COLOER
COLD
COWER
oooeDsoo
0000000
To turn on refrigerator:
•
Press and hold ON/OFF for 2 seconds. The indicator lights
show the current temperature control settings.
NOTE: Settings to the left of the mid-setting
make the
temperature
less cold. Settings to the right of the mid-setting
make the temperature colder.
IMPORTANT:
•
The Refrigerator Control adjusts the refrigerator compartment
temperature.
The Freezer Control adjusts the freezer
compartment
temperature.
•
Wait 24 hours after you turn on the refrigerator before you put
food into it. If you add food before the refrigerator has cooled
completely, your food may spoil. Adjusting the Refrigerator
and Freezer Controls to a colder setting will not cool the
compartments
any faster.
•
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked, before adjusting the controls.
•
The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
Adjusting Electronic
Controls
NOTE: Wait at least 24 hours between adjustments.
Recheck the
temperatures
before other adjustments
are made.
If you need to adjust temperatures:
•
Press the FREEZER or REFRIGERATOR arrow to move the
indicator light to the right, one setting at a time. Continue
moving the indicator light until the desired setting is reached.
• o o
1
2
3 <_
S
6
7
i
|
,t............... j
NOTE: With each press of the arrow, you will hear a beep as
the light moves to the next setting. The indicator light moves
to a setting of "7" and then returns to the setting of "1."
CONDITION:
SETTING ADJUSTMENT:
REFRIGERATOR too cold
REFRIGERATOR Control
- Not set correctly for
one setting lower
conditions
REFRIGERATOR too warm
REFRIGERATOR Control
- High use or room very warm
one setting higher
FREEZER too cold
FREEZER Control one
- Not set correctly for
setting lower
conditions
FREEZER too warm/too little ice
FREEZER Control one
- High use or heavy ice usage
setting higher
Additional
Electronic Control Panel Features
Additional features are located on the control panel at the top of
the refrigerator compartment.
Accelerated
Ice Production
The accelerated ice feature assists with temporary periods of
heavy ice usage by increasing ice production over a 24-hour
period.
•
Press the ICE touch pad to set the freezer temperature
to
10°F (-23°C). The Accelerated
Ice setting will remain on for 24
hours unless manually turned off.
•
If increased ice production
is desired at all times, set the
Freezer Control to a colder setting. Adjusting the freezer to a
colder temperature
may make some foods, such as ice
cream, harder.
Cut Hazard
Use a sturdy glass when dispensing ice or water.
Failure to do so can result in cuts.
Depending on your model, you may have one or more of the
following options: the ability to select either crushed or cubed
ice, a special light that turns on when you use the dispenser, or a
lock option to avoid accidental dispensing.
The Ice Dispenser
Ice dispenses from the ice maker storage bin in the freezer. When
the dispenser lever is pressed:
•
A trap door opens in a chute between the dispenser and the
ice bin. Ice moves from the bin and falls through the chute.
•
When you release the dispenser lever, the trap door closes
and the ice dispensing stops. The dispensing system will not
operate when the freezer door is open.
11
Tabla de contenido
